Standards |
‧IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
‧IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
‧IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
‧IEEE 802.3z 1000Base-SX/LX Ethernet
‧IEEE 802.3x Flow Control capability
‧IEEE 802.1q VLAN
‧IEEE 802.1p Class of Service
‧IEEE 802.1x Access Control
‧IEEE 802.1d Spanning Tree
‧IEEE 802.1w Rapid Spanning Tree
‧IEEE 802.1s Multiple Spanning Tree
‧IEEE 802.3ad Link Aggregation Control Protocol (LACP)
‧IEEE 802.3af PoE |
Ports |
‧Port 1 to 20: 10/100/1000 Mbps TP Jack (RJ-45)
‧Port 21 to 24: 1000Mbps SFP Fiber Module Dual Media Auto Detection
‧Console Port: DB9 console port |
Mac Table Size |
‧8K |
Switching Capacity |
‧48Gbps switch capacity |
Jumbo frame |
‧Supports Jumbo frame, up to 9K |
VLAN |
‧Port-base VLAN
‧IEEE802.1q tag-base VLAN, up to 4k active VLANs
‧Support the Q-in-Q (Double-tag)
‧Support MVR (Multicast VLAN Registration) |
VSM (Virtual Stacking Management) |
‧Virtual stacking, no extra stacking hardware is required
‧Distributed stacking, no physical central wiring closet is needed |
QoS |
‧Supports Port Based, 802.1p and Diffserv (IPv4 ) QoS packet classification
‧Supports two scheduling, WRR and Strict
‧Supports 802.1p QoS with four level priority queue |
Bandwidth Control |
‧Supports bandwidth rating per port ingress and egress rate limit
500Kbps~1000Mbps with 1Kbps |
Protocol LACP |
‧Port trunking with 12 trunking group
‧Up to 16 ports for each group |
GVRP/GARP |
‧802.1q with GVRP/ GARP |
Port Mirror |
‧Support port mirror |
Multicasting |
‧Supports IGMPv3 snooping including active and passive mode
‧Supports IGMP proxy including active and passive mode |
STP/RSTP/MSTP |
‧802.1d/1w/1s |
PoE Specification |
‧24 IEEE802.3af PoE PSE ports
‧Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6
‧PoE-PSE activity LED indicator
‧Auto detect powered device and consumption levels
‧Supports per port power consumption monitoring
‧Smart feature for PD on/off, PD detection, power level, PD status and power
feeding priority
‧Circuit protection to prevent power interference between ports
‧Supports per port PoE State setting
‧Supports per port power priority setting
‧185 or 380 watts of total power diversified options |
Network Security |
‧802.1x access control for port based and MAC based authentication
‧Management access policy control
‧Access Control List
‧IP-MAC-Port binding
‧DHCP Snooping (Including DHCP Option 82)
‧SSL/ SSH for Management(Optional by Project Requirement)
‧TACACS+ for Management Authentication (Optional by Project Requirement) |
Storm Control |
‧Unknown Unicast/Broadcast/Multicast Storm Suppression |
SNMP agent |
‧Version. 1, 2c
‧Supports MIB II(RFC1213), RMON MIB(RFC1757), Bridge MIB (RFC 1493),
Ethernet MIB(RFC 1643), Enterprise MIB |
LED |
‧System: POWER, FAN1, FAN2 (Green)
‧TP Port 1 to 24: LINK/SPD/ACT(Green), PoE (Green)
‧SFP Port 21 to 24: LINK/ACT (Green) |
Power Consumption |
‧Max. 15W (in case no PD device connected)
‧Max. 185W (with 12 * 15.4W PD device connected)
‧Max. 380W (with 24 * 15.4W PD device connected) |
Power Supply |
‧Internal Power supply 100~240VAC, 50/60 Hz |
Environment |
‧Operating Temperature: 0°C to 40°C
‧Operating Humidity: 5% to 90% (Non-Condensing) |
Dimensions |
‧44 * 442 * 248 mm (RP-PEG244I+)
‧44 * 442 * 366 mm (RP-PEG244IF+) |
Certification |
‧FCC, CE |