Standards |
‧IEEE 802.3 10Base-T Ethernet
‧IEEE 802.3u 100Base-TX Fast Ethernet
‧IEEE 802.3ab 1000Base-T Gigabit Ethernet
‧IEEE 802.3z 1000Base-X Gigabit Ethernet
‧IEEE802.3x Flow Control and Back Pressure |
Interface |
‧8 x 10/100/1000 Mbps RJ45 Ports
‧4 x 100/1000Base SFP slots |
Operating mode |
‧Store and forward, L2 wire-speed/non-blocking switching engine |
MAC addresses |
‧ 8K |
Jumbo frames |
‧9K Bytes |
RJ45 Ports |
‧Support straight or cross wired cables
‧10/100/1000 Mbps speed auto-negotiation; Full and half duplex
‧1500 VRMS 1 minute Ethernet isolation |
SFP (pluggable) Ports |
‧Support 100FX SFP transceiver
‧Support 100/1000BaseT SFP transceiver
‧LC typically for fiber (depends on module)
‧Typical 50 or 62.5/125 μm for multimode (mm);
Typical 8 or 9/125 μm for single mode (sm) |
Fast failover protection rings |
‧Link loss recovery < 20ms
‧Single & Multiple rings supported |
Spanning Tree Protocol |
‧IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
Port Trunk with LACP |
‧Static trunk or Dynamic via LACP (Link Aggregation Control Protocol) |
Flow control |
‧IEEE 802.3x (Full Duplex) and Back-Pressure(Half Duplex) |
Max VLANs |
‧256 |
VLAN Types |
‧Port-based VLANs
‧IEEE 802.1Q tag-based VLANs
‧IEEE 802.1ad Double Tagging (Q in Q) |
Multicast protocols |
‧IGMP v1, v2, v3 with up to 255 multicast groups
‧IGMP snooping and querying
‧Immediate leave and leave proxy
‧Throttling and filtering |
LLDP |
‧IEEE 802.1ab Link layer Discovery Protocol (LLDP) |
Priority |
‧IEEE 802.1p QoS |
Number of queues per port |
‧8 |
Scheduling schemes |
‧SPQ, WRR |
Traffic Shaper |
‧port-based shaping |
Port security |
‧IP and MAC-based access control
‧IEEE 802.1X authentication Network Access Control |
Storm Control |
‧Multicast/Broadcast/Flooding Storm Control |
User Management interfaces |
‧Cisco-like CLI (command line interface)
‧WEB-based Management
‧SNMP v1, v2c , v3
‧Telnet (5 sessions) |
Management Security |
‧HTTPs, SSH, SSL
‧Radius Client for Management
‧RADIUS/TACACS |
Upgrade & Restore |
‧FTP for Configuration Import/Export,
FTP for Firmware Upgrade |
Diagnostic |
‧Syslog
‧Per VLAN mirroring
‧Ethernet Copper connection diagnostic tool
‧SFP with DDM (Digital Diagnostic Monitoring) |
MIBs |
‧RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB
RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB |
DHCP |
‧Client, Server, Relay, Snooping, Option 82 |
NTP/SNTP |
‧Yes |
System status |
‧Device info/status; Ethernet port status; PoE status |
PoE management |
‧Scheduling; power control; PoE PD power consumption |
Power input |
‧Redundant Input Terminals |
Input voltage range |
‧46-57 VDC |
Total PoE output power budget |
‧240W |
PoE PSE port output power management |
‧Scheduling; power control; PoE PD power consumption |
Reverse power protection |
‧Yes |
Transient protection |
‧> 15,000 watts peak |
Power consumption |
‧15W without PD loading |
Indicators |
‧Power input status
‧Link & Speed
‧PoE Power applying |
Housing |
‧IP30 Protection |
Installation mounting |
‧DIN Rail mounting and Wall Mounting |
Environment |
‧Operating temperature: -40 to +75°C (cold startup at -40°C)
‧Storage temperature: -40 to +85 °C
‧Humidity: 5 to 95% RH (non-condensing) |
Dimension |
‧77 x 154 x 128mm (LxWxD) |
Vibration, shock & freefall |
‧IEC68-2-6, -27, -32 |
Certification compliance |
‧CE/FCC/UL-508 |
Electrical safety |
‧CSA C22, EN61010-1, CE |
EMC |
‧FCC Part 15, CISPR 22 (EN55022) Class A
IEC61000-4-2, -3, -4, -5, -6 |